HUGE Rare Size - Great Value This Tool Does NOT Have Center Pilot Drill Do NOT Use Dry 3/8 inch Shank Size Can be used with Handheld or Upright Drillers The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Center hole drills are mostly for wood, metal, etc. Drilax tools can drill 1 " in depth. Shank size is 3/8" - common electric or rechargeable drillers can be used. Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool: a- You can build a mini water dam around the hole with plumbers putty. b- You can choose to spray water on the drill bit. c- Or you can use running water to cool the drill bit. EASY TO USE Center drill bits are for wood, metal, etc. ; Here is how you can keep the drill bit on : a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in pluntil it makes the initial marks. b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical. c- You can manually guide the drill bit with wet sponge. DRILAX Diamond Hole Saw Features: Diamond Coated Hole Saw Drilling Holesaw Tool 3 3/4" - Larger Than 3 inches - Smaller Than 4 Inches Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite, Quartz Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required Cylindrical Shank 3/8" - No Need for Adapters or Arbor.
