Description:

Item Type: 200 Inch Splinter Guard Replacement 495209 for Festool- Self-Adhesive Hard Rubber Tape for FS/2, for FS/2 KP, for FSK Guide Rails, 27/32 x 1/16 Inch, Splinter-Free Track Saw Accessories. Compatibility: The replacement for festool track saw accessories replace 495209 495207 for festool splinter guard replacement strip and is compatible for FS/2, for FS/2 KP, and for FSK festool guide rails & for festool track saws. Periodically replacing for festool track saw splinter can keep your cuts splinterfree, especially if you are switching between blades, or using for festool guide rail with more than one track saw.. Function: You can replace the splinter guard for festool track saw accessories as needed to ensure good alignment for festool guide rail with the cutting line, and to prevent tearing during parallel and lateral cutting. The new splinter guard can match the saw blade, accurately align the cutting line, and save valuable setup time. Clear Splinter guard enhance visibility of the cutting line.. Upgraded hard materials: The 495209 for festool splinter guard replacement stripis made of high-quality hard rubber, and uses strong adhesive, with a strong viscosity and high transparency. It can tightly adhere for festool guide rail without falling off easily. The length of the Splinter guard is 200 inches, the width is 27/32 "inches, and the thickness is 1/16 inch. The replacement for festool guide rail accessories is self-adhesive and can be easily cut to size.. Easy to replace: As the splinter guard is cut into upon the first use, it reflects the cutting edge, meaning that it can be applied at the scribe mark. You just need to remove the tape to use it. It's very simple. NOTE: You need to clean the rail with acetone and leaving surface grease free prior fitting the new splinter guard..