Description:

This NSi Industries IPCS7501 Easy-Tinsulation-piercing connector is suitable for tapping electrical lines in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications. It can be used on main lines from 750 MCM (thousand circular mils) to American Wire Gauge (AWG) 3/0 with tlines from #10 to #14 AWG. It is fully insulated and can be used on energized conductors as long as the tline is not under load. Double shear-head bolts ensure that the proper amount of torque is applied during installation. This connector is not recommended for use with extra-flexible cables, is not approved for submersible applications, and cannot be used with bare wire or as a splice. It is rated for 600V and 90 degrees C and meets American National Standards Institute (ANSI) C119. 4 requirements and is Underwriters Laboratories (UL) 486B Listed. This insulation-piercing connector is suitable for a wide range of electrical line tapping applications with appropriately sized conductors. Specifications Main line size range 750 MCM to 3/0 AWG Tline size range #10 to #14 AWG Copper current rating 55 amp Aluminum current rating 40 amp Voltage rating 600V Temperature rating 90 degrees C Dimensions* 3. 7 x 2. 4 x 2. 6 inches (H x W x L) Standards met ANSI C119. 4, UL 486B Listed * H is height, the vertical distance from bottom to top; W is width, the horizontal distance from left to right; L is length, the horizontal distance from front to back. NSi Industries manufactures electrical components and sensors, lighting products, and energy management products. The company, founded in 1975, is headquartered in Huntersville, NC. Model # IPCS7501 Features: Insulation-piercing connector for tapping electrical lines Can be used on main lines from 750 MCM to 3/0 AWG with tlines from #10 to #14 AWG Can be used in copper-to-copper, copper-to-aluminum, and aluminum-to-aluminum solid or stranded wire applications Rated for 600V and 90 degrees C Meets ANSI C119. 4 requirements and is UL 486B Listed.